USED CRANES FOR SALE

    2007 Terex BT5092 – 25 TON Truck Crane - Click Here for Spec Sheet >>

                     Stinger 4792-1/5092

                     Mounted on 2007 Strerling Model 7501 Truck

                     92 ft 3 Section fully proportional hydraulically operated telescopic “keel” boom

(29ft to 92 ft Boom)

50,000 LB Max Capacity

101 ft Boom Tip Height

2-Speed planetary hoist – 11,400 LBS Max Line Pull (150/220 fpm)

9/16” wire rope

360 degree rotation – With Front Stabilizer outrigger

Electronic Load moment indicator and anti-two block device with audible alarms and function shut down

Dual operator control stations

90 GAL hydraulic reservoir

3 Section hydraulic pump

21 ft subframe

4 Hydraulic Out Riggers, with 1 hydraulic Front Stabilizer

Removable Boom Rest

CALL FOR PRICE!!

        Manitex M1768 Truck Crane - 68 ft reach - Click Here for Spec Sheet >>

17 TON Crane - Year: 2000

Mounted on an 2000 International 4700 – 210 HP

 34,000 Lb Maximum Capacity

3 Section hydraulically operated telescopic boom – 26 ft to 68 ft

Truck height: 78 ft + 40’ Telescopic Jib = 118 ft

2-Speed planetary hoist

260 ft of 9/16” EIPS IWRC wire rope

5 Ton (4.5 mT) hook and ball

2 Sheave boom point

Anti-Two Block shut off

Boom hoist cylinder

System pressure gauge

70 GAL hydraulic reservoir

Removable boom rest

Engine start/stop

372 degree non continuous rotation

Pedestal, turret, rotation bearing and swing system

Dual operator control stations

Hydraulic capacity alert warning system (HYCAS) – Audio

2 forward Hydraulic Outriggers

2 rear hydraulic stabilizers

Audible outrigger/stabilizer motion alarm

A-Frame link type outriggers

A-Frame rear stabilizer

3 Section vane type hydraulic pump

Signal horn

18 ft sub frame

CALL FOR PRICE!!

Small Knuckle Boom Cranes

(2) PC 2300 Compact Cranes FOR SALE

            (1) PC2300A

            (1) PC2300B

 

Standard Crane Technical Specifications

 

Max. lifting moment:                 2,3 mt  = 22,6 kNm = 16640 ft.lbs

Max. lifting capacity                  1820 kg = 17,9 kN = 4010 lbs

Max. hydraulic outreach:            4,1 m = 13' 5''

Slewing angle                            340 °

Slewing torque                           0,3 mt = 3,2 kNm = 2390 ft.lbs

Fitting space required                 0,40 m = 1' 4''

Width folded                              0,9 m = 2' 11''

Max. operating pressure 185 bar = 2683 psi

Recommended pump capacity     6 l/min = 1.3 imp.gal./min to 1.6 US gal./min

Dead weight standard crane        230 kg = 510 lbs

 

(1) PC 2300A Palfinger Truck Crane

Hydraulic Outreach                  Capacity

1,2 m = 3' 9'' max                       1820 kg = 4010 lbs

2,0 m = 6' 7''                              1040 kg = 2290 lbs

3,1 m = 10' 2''                            715 kg = 1580 lbs

 

            Crane is in good usable shape. Includes 2,000 lb winch kit with wire and weight ball, and safety hook. Some pitting on the rods, none of the cylinders leak.

 

(1) PC2300MB Palfinger Truck Crane

Hydraulic Outreach                  Capacity

1,3 m = 4' 1'' max                       1700 kg = 3750 lbs

2,2 m = 7' 3''                              1010 kg = 2230 lbs

3,0 m = 9' 10''                            700 kg = 1540 lbs

4,1 m = 13' 5''                            530 kg = 1170 lbs

 

             Crane is in good usable shape. Includes 2,000 lb winch kit with wire and weight ball, and safety hook.  Prior customer, sprayed crane with cosmoline like substance for protection against the marine environment. Rods are pristine, no leaks.

Terex Crane  

(1) Model TC-85-2 Terex Telescopic Boom Crane – Stinger II Series

Maximum Capacity: 16,000 lbs @ 4 ft                                
Winch Capacity: 16,000 lb (w/ 3 parts in line)
Max Horizontal Reach: 48 ft
Max Vertical Reach: 52 ft

Crane Truck

1985 International by Harvester Company
Model: 1954
VIN: 1HTLDTVN9FHA33148

USED HIAB CRANES - APROX. CAPACITIES

1 HIAB 120 = 8752 lbs @ 30 ft & 11,000 lbs @ 10 ft

1 HIAB 080 = 2,983 lbs @ 23 ft & 5,894 lbs @ 10 ft

    Attached are two used HIAB sea cranes that I have in stock. They units
both need to be overhauled and do not come with winches or any extras. I can
provide you a new winch, just let me know.

The HIAB 080: $ 4,000.00
The HIAB 120: $ 6,000.00

This is FOB our facility in Westport, MA 02790.

This equipment and all used equipment is sold "as is where is" and there in
no warranty, expressed or implied.
 

Do you have a crane that you would like to sell? Email us the complete specifications on your cranes, with capacity charts and pictures.

Please included your name, contact information and asking price.

<< Back to used equipment